Circuit Break Podcast #375

From Zero to Hero in Python

Related Topics
Remote Ownership

Tariffs hike hits electronics! Hear Parker analyze cost impact & debate chip kill switch ethics with Stephen. Plus, Parker's Python invoice hack!

Kent Johnson: Religious Diversity in Electrical Engineering

Kent Johnson, Senior Corporate Advisor at the Religious Freedom and Business Foundation discusses the role of religious diversity in the workplace.

The Yeti Job Hunt

Stephen is on the hunt for the next step in his electrical engineering career and shares the shifts in the industry and what employers are looking for.

Other Resources

Circuit Break Podcast
Webinars
Videos
Tour MacroFab's ITAR-Compliant Facility

April 21, 2023, Episode #375

Python software language, more and more electrical engineering jobs are requiring this as a skill set but is it just snake oil?

Topics:

  • Why is python requested in embedded software/firmware engineer jobs?
    • The Complete Python Bootcamp From Zero to Hero in Python - Udemy
  • Rapid Harness Software
    • Designing some pinball harnesses
    • Powerful for a single task
    • Has a free version but limited
  • CNC stuff
    • Critical speeds on ball screws
      • Length
      • Diameter
      • End supports
    • SFU2010 got 700in/min which is almost a foot a second.
    • Rotational speed of 1778 RPM
    • Power supplies for stepper motors
      • Shared axis power supply considerations.

About the Hosts

Parker Dillmann
  Parker Dillmann

Parker is an Electrical Engineer with backgrounds in Embedded System Design and Digital Signal Processing. He got his start in 2005 by hacking Nintendo consoles into portable gaming units. The following year he designed and produced an Atari 2600 video mod to allow the Atari to display a crisp, RF fuzz free picture on newer TVs. Over a thousand Atari video mods where produced by Parker from 2006 to 2011 and the mod is still made by other enthusiasts in the Atari community.

In 2006, Parker enrolled at The University of Texas at Austin as a Petroleum Engineer. After realizing electronics was his passion he switched majors in 2007 to Electrical and Computer Engineering. Following his previous background in making the Atari 2600 video mod, Parker decided to take more board layout classes and circuit design classes. Other areas of study include robotics, microcontroller theory and design, FPGA development with VHDL and Verilog, and image and signal processing with DSPs. In 2010, Parker won a Ti sponsored Launchpad programming and design contest that was held by the IEEE CS chapter at the University. Parker graduated with a BS in Electrical and Computer Engineering in the Spring of 2012.

In the Summer of 2012, Parker was hired on as an Electrical Engineer at Dynamic Perception to design and prototype new electronic products. Here, Parker learned about full product development cycles and honed his board layout skills. Seeing the difficulties in managing operations and FCC/CE compliance testing, Parker thought there had to be a better way for small electronic companies to get their product out in customer's hands.

Parker also runs the blog, longhornengineer.com, where he posts his personal projects, technical guides, and appnotes about board layout design and components.

Stephen Kraig
  Stephen Kraig

Stephen Kraig is a component engineer working in the aerospace industry. He has applied his electrical engineering knowledge in a variety of contexts previously, including oil and gas, contract manufacturing, audio electronic repair, and synthesizer design. A graduate of Texas A&M, Stephen has lived his adult life in the Houston, TX, and Denver, CO, areas.

Stephen has never said no to a project. From building guitar amps (starting when he was 17) to designing and building his own CNC table to fine-tuning the mineral composition of the water he uses to brew beer, he thrives on testing, experimentation, and problem-solving. Tune into the podcast to learn more about the wacky stuff Stephen gets up to.

Special thanks to whixr over at Tymkrs for the intro and outro!

Related Podcasts

It is 2023 why does footprint design still suck

It is 2023, Why Does Footprint Design Still Suck?

Why is there such a disconnect between component datasheet drawings and EDA footprint layout tools? Stephen and Parker dive into this on this podcast.

CB FI 432

Remote Ownership

Tariffs hike hits electronics! Hear Parker analyze cost impact & debate chip kill switch ethics with Stephen. Plus, Parker's Python invoice hack!

Estimating effort

Estimating Effort

Why is estimating a projects completion time feel like it takes more work then the actual project? Estimating Project Time, the quest of management.

CB FI 419

Kent Johnson: Religious Diversity in Electrical Engineering

Kent Johnson, Senior Corporate Advisor at the Religious Freedom and Business Foundation discusses the role of religious diversity in the workplace.

Yeti job hunt

The Yeti Job Hunt

Stephen is on the hunt for the next step in his electrical engineering career and shares the shifts in the industry and what employers are looking for.

Signal switching for maximum offness

Signal Switching for Maximum Offness

Hail to the signal switcher! On this episode, Parker wraps up his prep work for the Extra-Life Charity stream and Stephen discusses switching signals.

About MacroFab

MacroFab offers comprehensive manufacturing solutions, from your smallest prototyping orders to your largest production needs. Our factory network locations are strategically located across North America, ensuring that we have the flexibility to provide capacity when and where you need it most.

Experience the future of EMS manufacturing with our state-of-the-art technology platform and cutting-edge digital supply chain solutions. At MacroFab, we ensure that your electronics are produced faster, more efficiently, and with fewer logistic problems than ever before.

Take advantage of AI-enabled sourcing opportunities and employ expert teams who are connected through a user-friendly technology platform. Discover how streamlined electronics manufacturing can benefit your business by contacting us today.